MC 4.0 ThermoAir

MiniAir macro ATEX plastic/aluClassification II 2G EEx ia IIC T6 / I M2 EEX ia IThe MiniAir macro probe made of plastic and aluminium is suitable to use it in the environment of explosive/inflammatory substances. There is just one flow measuring range from 0,3 to 40 m/s. With a measuring  accuracy of the flow of 1,0 % F.S. and 1,5 % o.r. is the use of a vane anemometer most exact measurement method. With an accuracy of +/-0,5°C is this probe able to measure temperatures from -20 to +140°C and you can use it in temperatures from -30 to +100°C.The cable is 2 m long  and can be exposed to temperatures of 80 to 85°C.With the following measurements the macro is our biggest snap head:head diameter 85 x 80 mm; probe length 235 mm The probe should be stored in temperatures from -65 to +150°C.By the snap head principle the probe is useable for a non stop operation and you can easily change the head.MiniAir macro ATEX plastic/stainless steelClassification II 2G EEx ia IIC T6 / I M2 EEX ia IThe MiniAir macro probe made of plastic and stainless steel is suitable to use it in the environment of explosive/inflammatory substances. There is just one flow measuring range from 0,2 to 20 m/s. With a measuring  accuracy of the flow of 1,0 % F.S. and 1,5 % o.r. is the use of a vane anemometer most exact measurement method. With an accuracy of +/-0,5°C is this probe able to measure temperatures from -20 to +140°C and you can use it in temperatures from -30 to +100°C.The cable is 2 m long  and can be exposed to temperatures of 80 to 85°C.With the following measurements the macro is our biggest snap head:head diameter 85 x 80 mm; probe length 235 mmThe probe should be stored in temperatures from -65 to +150°C.By the snap head principle the probe is useable for a non stop operation and you can easily change the head.MiniAir macro ATEX alu/brassClassification II 2G EEx ia IIC T6 / I M2 EEX ia IThe MiniAir macro probe made of aluminium and brass is suitable to use it in the environment of explosive/inflammatory substances. There is just one flow measuring range from 0,2 to 20 m/s. With a measuring  accuracy of the flow of 0,5 % F.S. and 1,5 % o.r. is the use of a vane anemometer most exact measurement method. With an accuracy of +/-0,5°C is this probe able to measure temperatures from -20 to +140°C and you can use it in temperatures from -30 to +100°C.The cable is 2 m long  and can be exposed to temperatures of 80 to 85°C.With the following measurements the macro is our biggest snap head:head diameter 80 x 70 mm; probe length 235 mmThe probe should be stored in temperatures from -65 to +150°C.By the snap head principle the probe is useable for a non stop operation and you can easily change the head.

MiniAir Micro plastic/aluminum up to 80°C / non-aggressive gases  Flow measuring ranges: 0.6 - 20 m/s or 0.7 - 40 m/s  Measuring accuracy: 1.0 % f.s. and 1.5 % f.s.  Operating temperature: -30 to 80ºC  Temperature measurement with accuracy of +/-0.5°C  Cable length: 2 m    Head diameter 11 x 15 mm; insertion opening 16 mm; sensor length 165 mm  Thanks to the renowned snap-on head principle, the sensors are suitable for continuous operation. The measuring head can be replaced in just a few simple steps.  MiniAir Micro steel up to 140°C / aggressive gases  Flow measuring ranges: 1.0 - 20 m/s or 1.3 - 40 m/s   Measuring accuracy: 1.5 % f.s. and 3.5 % f.s.   Operating temperature: -30 to 140ºC   Temperature measurement with accuracy of +/-0.5°C   Cable length: 2 m     Head diameter 11 x 15 mm; insertion opening 16 mm; sensor length 165 mm  The associated five-wire cable has a length of 2 m and can be exposed to temperatures between 80 and 85°C. The probe heads can be replaced if necessary.  MiniAir Micro steel up to 250°C / aggressive gases   Flow measuring ranges: 1.0 - 20 m/s or 1.3 - 40 m/s    Measuring accuracy: 1.5 % f.s. and 3.5 % f.s.    Operating temperature: -30 to 250ºC / associated evaluation box (external electronics) up to 65°C. Cable length: 2.4 m from external electronics, 1.5 m to external electronics  Head diameter 11 x 15 mm; retraction opening 16 mm; sensor length 165 mm  The associated five-wire cable from the external electronics has a length of 2.4 m and can withstand a temperature of up to 65°C. The probe heads can be replaced if necessary. 

MiniAir Mini plastic/aluminum up to 80°C / non-aggressive gases  Flow measuring ranges: 0.4 - 20 m/s or 0.5 - 40 m/s  Measuring accuracy: 1.0 % f.s. and 1.5 % f.s.  Operating temperature: -30 to 80ºC  Temperature measurement with accuracy of +/-0.5°C  Cable length: 2 m    Head diameter 22 x 28 mm; insertion opening 35 mm; probe length 175 mm  Thanks to the renowned snap-on head principle, the sensors are suitable for continuous operation.  The measuring head can be replaced in just a few simple steps.  MiniAir Mini steel up to 140°C / aggressive gases  Flow measuring ranges: 0.7 - 20 m/s or 0.8 - 40 m/s   Measuring accuracy: 1.0 % f.s. and 2.0 % f.s.   Operating temperature: -30 to 140ºC   Temperature measurement with accuracy of +/-0.5°C   Cable length: 2 m     Head diameter 22 x 28 mm; insertion opening 35 mm; sensor length 175 mm  The associated five-core cable has a length of 2 m and can be exposed to temperatures between 80 and 85°C.  The probe heads can be replaced if necessary.  MiniAir Micro steel up to 250°C / aggressive gases   Flow measuring ranges: 0.7 - 20 m/s or 0.8 - 40 m/s    Measuring accuracy: 1.0 % f.s. and 2.0 % f.s.   Operating temperature: -30 to 250ºC / associated evaluation box (external electronics) up to 65°C.  Cable length: 1.5 m from external electronics, 2.4 m to external electronics  Head diameter 22 x 28 mm; retraction opening 35 mm; sensor length 175 mm  The associated five-wire cable from the external electronics has a length of 2.4 m and can withstand a temperature of up to 65°C.

MiniWater Micro plastic/aluminum up to 80°C Flow measuring ranges: 0.04 - 5 m/s or 0.05 - 10 m/s  Measuring accuracy: 2.0 % f.s. and 3.5 % f.s.  Operating temperature: -30 to 80ºC  Temperature measurement with accuracy of +/-0.5°C  Cable length: 5 m    Head diameter 11 x 15 mm; insertion opening 16 mm; sensor length 165 mm  Thanks to the renowned snap-on head principle, the sensors are suitable for continuous operation.  The measuring head can be replaced in just a few simple steps.

MiniWater Micro plastic/aluminum up to 80°C Flow measuring ranges: 0.02 - 5 m/s or 0.03 - 10 m/s  Measuring accuracy: 2.0 % f.s. and 3.0 % f.s.  Operating temperature: -30 to 80ºC  Temperature measurement with accuracy of +/-0.5°C  Cable length: 5 m    Head diameter 22 x 28 mm; insertion opening 35 mm; sensor length 175 mm  Thanks to the renowned snap-on head principle, the sensors are suitable for continuous operation.  The measuring head can be replaced in just a few simple steps.