MiniAirPro Mini
Product number:
SW10091.21
Product information "MiniAirPro Mini"
MiniAirPro Mini plastic/aluminum up to 80°C / non-aggressive gases
Flow measuring ranges: 0.4 - 20 m/s or 0.5 - 40 m/s
Output signal: 4 - 20 mA, 0 - 1 Volt, Hz according to table or Modbus RTU
Measuring accuracy: 1.0 % f.s. and 1.5 % f.s.
Operating temperature: -30 to 80ºC
Cable length: 5 m
Head diameter: 22 x 28 mm; insertion opening 35 mm; sensor length 175 mm
Thanks to the renowned snap-on head principle, the sensors are suitable for continuous operation.
The measuring head can be replaced in just a few simple steps.
MiniAirPro Mini steel up to 140°C / aggressive gases
Flow measuring ranges: 0.7 - 20 m/s or 0.8 - 40 m/s
Output signal: 4 - 20 mA, 0 - 1 Volt, Hz according to table or Modbus RTU
Measuring accuracy: 1.0 % f.s. and 2.0 % f.s.
Operating temperature: -30 to 140ºC
Head diameter: 22 x 28 mm; retraction opening 35 mm; sensor length 175 mm
The associated three-wire cable has a length of 5 m and can be exposed to temperatures between 80 and 85°C.
The probe heads can be replaced if necessary.
MiniAirPro Mini steel up to 250°C / aggressive gases
Flow measuring ranges: 1.0 - 20 m/s or 1.3 - 40 m/s
Output signal: 4 - 20 mA, 0 - 1 Volt, Hz according to table or Modbus RTU
Measuring accuracy: 1.0 % f.s. and 2.0 % f.s.
Operating temperature: -30 to 250ºC / associated evaluation box (external electronics) up to 65°C.
Cable length: 5 m from external electronics, 2.4 m to external electronics
Head diameter: 22 x 28 mm; retraction opening 35 mm; sensor length 175 mm
The associated three-wire cable from the external electronics has a length of 5 m and can be exposed to temperatures between 80 and 85°C.
The probe heads can be replaced if necessary.