MiniWater60 mini 5 m/s (vane and handle in alu)
Product number:
SW10048.2
Product information "MiniWater60 mini 5 m/s (vane and handle in alu)"
Process measuring device - frequency signal
The MiniWater60 made of aluminium and plastic is useable for flow measurement in waters.
There are two different flow measuring ranges 0,02 to 5 m/s and 0,03 to 10 m/s.
With a measuring accuracy of the flow of 2,0 % F.S. and 3,0 % o.r. is the use of vance anemometer most exact measurement method.
You can use the probe in temperatures from 0°C to +70°C.
An external power of 4,5 to 5,5 V DC is necessary for the electricity supply.
The output frequency of the probe is 0-460 Hz (20m/s) and 0-457 Hz (40m/s).
With an unloaded supply of 5 V DC the outputsignal is 0-4 V.
Every probe with a frequency output is TTL compatible.
The cable is 5 m long.
With the following measurements the mini is our middle snap head:
head diameter 22 x 28 mm; access opening 35 mm; probe length 175 mm
The probe should be stored in temperatures from -65 to +150°C.
There are two different flow measuring ranges 0,02 to 5 m/s and 0,03 to 10 m/s.
With a measuring accuracy of the flow of 2,0 % F.S. and 3,0 % o.r. is the use of vance anemometer most exact measurement method.
You can use the probe in temperatures from 0°C to +70°C.
An external power of 4,5 to 5,5 V DC is necessary for the electricity supply.
The output frequency of the probe is 0-460 Hz (20m/s) and 0-457 Hz (40m/s).
With an unloaded supply of 5 V DC the outputsignal is 0-4 V.
Every probe with a frequency output is TTL compatible.
The cable is 5 m long.
With the following measurements the mini is our middle snap head:
head diameter 22 x 28 mm; access opening 35 mm; probe length 175 mm
The probe should be stored in temperatures from -65 to +150°C.
Because of the snap head principle our probes are useable for a non-stop operation and the head is easily changeable.