MiniAir Micro plastic/aluminum up to 80°C / non-aggressive gases  Flow measuring ranges: 0.6 - 20 m/s or 0.7 - 40 m/s  Measuring accuracy: 1.0 % f.s. and 1.5 % f.s.  Operating temperature: -30 to 80ºC  Temperature measurement with accuracy of +/-0.5°C  Cable length: 2 m    Head diameter 11 x 15 mm; insertion opening 16 mm; sensor length 165 mm  Thanks to the renowned snap-on head principle, the sensors are suitable for continuous operation. The measuring head can be replaced in just a few simple steps.  MiniAir Micro steel up to 140°C / aggressive gases  Flow measuring ranges: 1.0 - 20 m/s or 1.3 - 40 m/s   Measuring accuracy: 1.5 % f.s. and 3.5 % f.s.   Operating temperature: -30 to 140ºC   Temperature measurement with accuracy of +/-0.5°C   Cable length: 2 m     Head diameter 11 x 15 mm; insertion opening 16 mm; sensor length 165 mm  The associated five-wire cable has a length of 2 m and can be exposed to temperatures between 80 and 85°C. The probe heads can be replaced if necessary.  MiniAir Micro steel up to 250°C / aggressive gases   Flow measuring ranges: 1.0 - 20 m/s or 1.3 - 40 m/s    Measuring accuracy: 1.5 % f.s. and 3.5 % f.s.    Operating temperature: -30 to 250ºC / associated evaluation box (external electronics) up to 65°C. Cable length: 2.4 m from external electronics, 1.5 m to external electronics  Head diameter 11 x 15 mm; retraction opening 16 mm; sensor length 165 mm  The associated five-wire cable from the external electronics has a length of 2.4 m and can withstand a temperature of up to 65°C. The probe heads can be replaced if necessary. 

MiniWater Micro plastic/aluminum up to 80°C Flow measuring ranges: 0.04 - 5 m/s or 0.05 - 10 m/s  Measuring accuracy: 2.0 % f.s. and 3.5 % f.s.  Operating temperature: -30 to 80ºC  Temperature measurement with accuracy of +/-0.5°C  Cable length: 5 m    Head diameter 11 x 15 mm; insertion opening 16 mm; sensor length 165 mm  Thanks to the renowned snap-on head principle, the sensors are suitable for continuous operation.  The measuring head can be replaced in just a few simple steps.

MiniAir micro  ATEX plastic/aluClassification II 2G EEx ia IIC T6 / I M2 EEX ia IThe MiniAir20 ATEX probe made of plastic and aluminium is suitable to use it in the environment of explosive substances. There are two different flow measuring ranges 0,6 to 20 m/s and 0,7 to 40 m/s. With a measuring  accuracy of the flow of 1,0 % F.S. and 3,0 % o.r. is the use of a vane anemometer most exact measurement method. With an accuracy of +/-0,5°C this probe is able to measure temperatures from -20 to +140°C and you can use it in temperatures from -30 to +140°C.The cable is 2 m long  and can be exposed to  temperatures of 80 to 85°C.With the following measurements the micro is our smallest snap head:head diameter 11 x 15 mm; probe length 165 mm The probe should be stored in temperatures from -65 to +150°C.By the snap head principle the probe is useable for a non stop operation and you can easily change the head.

MiniAir Mini plastic/aluminum up to 80°C / non-aggressive gases  Flow measuring ranges: 0.4 - 20 m/s or 0.5 - 40 m/s  Measuring accuracy: 1.0 % f.s. and 1.5 % f.s.  Operating temperature: -30 to 80ºC  Temperature measurement with accuracy of +/-0.5°C  Cable length: 2 m    Head diameter 22 x 28 mm; insertion opening 35 mm; probe length 175 mm  Thanks to the renowned snap-on head principle, the sensors are suitable for continuous operation.  The measuring head can be replaced in just a few simple steps.  MiniAir Mini steel up to 140°C / aggressive gases  Flow measuring ranges: 0.7 - 20 m/s or 0.8 - 40 m/s   Measuring accuracy: 1.0 % f.s. and 2.0 % f.s.   Operating temperature: -30 to 140ºC   Temperature measurement with accuracy of +/-0.5°C   Cable length: 2 m     Head diameter 22 x 28 mm; insertion opening 35 mm; sensor length 175 mm  The associated five-core cable has a length of 2 m and can be exposed to temperatures between 80 and 85°C.  The probe heads can be replaced if necessary.  MiniAir Micro steel up to 250°C / aggressive gases   Flow measuring ranges: 0.7 - 20 m/s or 0.8 - 40 m/s    Measuring accuracy: 1.0 % f.s. and 2.0 % f.s.   Operating temperature: -30 to 250ºC / associated evaluation box (external electronics) up to 65°C.  Cable length: 1.5 m from external electronics, 2.4 m to external electronics  Head diameter 22 x 28 mm; retraction opening 35 mm; sensor length 175 mm  The associated five-wire cable from the external electronics has a length of 2.4 m and can withstand a temperature of up to 65°C.

MiniWater Micro plastic/aluminum up to 80°C Flow measuring ranges: 0.02 - 5 m/s or 0.03 - 10 m/s  Measuring accuracy: 2.0 % f.s. and 3.0 % f.s.  Operating temperature: -30 to 80ºC  Temperature measurement with accuracy of +/-0.5°C  Cable length: 5 m    Head diameter 22 x 28 mm; insertion opening 35 mm; sensor length 175 mm  Thanks to the renowned snap-on head principle, the sensors are suitable for continuous operation.  The measuring head can be replaced in just a few simple steps.

MiniAir mini ATEX plastic/aluClassification II 2G EEx ia IIC T6 / I M2 EEX ia IThe mini ATEX probe made of plastic and aluminium is suitable to use it in the environment explosive substances. There are two different flow measuring ranges 0,4 to 20 m/s and 0,5 to 40 m/s. With a measuring  accuracy of the flow of 1,0 % F.S. and 1,5 % o.r. is the use of a vane anemometer most exact measurement method. With an accuracy of +/-0,5°C is this probe able to measure temperatures from -20 to +140°C and you can use it in temperatures from -30 to +140°C.The cable is 2 m long  and can be exposed to temperatures of 80 to 85°C.With the following measurements the mini is our middle snap head:head diameter 22 x 28 mm; probe length 175 mm The probe should be stored in temperatures from -65 to +150°C.By the snap head principle the probe is useable for a non stop operation and you can easily change the head.MiniAir mini ATEX stainless steel to 140°CClassification II 2G EEx ia IIC T6 / I M2 EEX ia IThe mini ATEX probe made of stainless steel is suitable to use it in the environment of explosive substances .There are two different flow measuring ranges 0,7 to 20 m/s and 0,8 to 40 m/s. With a measuring  accuracy of the flow of 1,0 % F.S. and 2,0 % o.r. is the use of a vane anemometer most exact measurement method. With an accuracy of +/-0,5°C is this probe able to measure temperatures from -20 to +140°C and you can use it in temperatures from -30 to +140°C.The cable is 2 m long  and can be exposed to temperatures of 80 to 85°C.With the following measurements the mini is our middle snap head:head diameter 22 x 28 mm; probe length 182 mm The probe should be stored in temperatures from -65 to +150°C.If required the head can be replaced by us.MiniAir mini ATEX stainless steel to 250°CClassification II 2G EEx ia IIC T6 / I M2 EEX ia IThe  mini ATEX probe made of stainless steel is suitable to use it in the environment explosive substances .There are two different flow measuring ranges 0,7 to 20 m/s and 0,8 to 40 m/s. With a measuring  accuracy of the flow of 1,0 % F.S. and 2,0 % o.r. is the use of a vane anemometer most exact measurement method. This probe does not have a temperature measurement. The probe is usable in temperatures from -30 to +250°C and the external electronic system in temperatures up to 65°C.The cable is 2,4 m long (1,5 m from the external electronic system) and can be exposed to a temperatures of 250°C.With the following measurements the mini is our middle snap head:head diameter 22 x 28 mm; probe length 182 mm The probe should be stored in temperatures from -65 to +250°C.The external electronic system and the cable should be stored in temperatures to max. 65°C.If required the head can be replaced by us.

MiniAir Macro plastic/aluminum up to 80°C / non-aggressive gases  Flow measuring ranges: 0.2 - 20 m/s or 0.3 - 40 m/s  Measuring accuracy: 1.0 % f.s. and 1.5 % f.s.  Operating temperature: -30 to 80ºC  Temperature measurement with accuracy of +/-0.5°C  Cable length: 2 m    Head diameter 80 x 85 mm; probe length 235 mm  Thanks to the renowned snap-on head principle, the sensors are suitable for continuous operation.  The measuring head can be replaced in just a few simple steps.  MiniAir Macro brass/ aluminum up to 140°C / aggressive gases  Flow measuring ranges: 0.2 - 20 m/s or 0.3 - 40 m/s   Measuring accuracy: 1.0 % f.s. and 1.5 % f.s.   Operating temperature: -30 to 140ºC   Temperature measurement with accuracy of +/-0.5°C   Cable length: 2 m     Head diameter 80 x 85 mm; sensor length 235 mm  The associated five-core cable has a length of 2 m and can be exposed to temperatures between 80 and 85°C. The impeller can be replaced if necessary.

MiniAir macro ATEX plastic/aluClassification II 2G EEx ia IIC T6 / I M2 EEX ia IThe MiniAir macro probe made of plastic and aluminium is suitable to use it in the environment of explosive/inflammatory substances. There is just one flow measuring range from 0,3 to 40 m/s. With a measuring  accuracy of the flow of 1,0 % F.S. and 1,5 % o.r. is the use of a vane anemometer most exact measurement method. With an accuracy of +/-0,5°C is this probe able to measure temperatures from -20 to +140°C and you can use it in temperatures from -30 to +100°C.The cable is 2 m long  and can be exposed to temperatures of 80 to 85°C.With the following measurements the macro is our biggest snap head:head diameter 85 x 80 mm; probe length 235 mm The probe should be stored in temperatures from -65 to +150°C.By the snap head principle the probe is useable for a non stop operation and you can easily change the head.MiniAir macro ATEX plastic/stainless steelClassification II 2G EEx ia IIC T6 / I M2 EEX ia IThe MiniAir macro probe made of plastic and stainless steel is suitable to use it in the environment of explosive/inflammatory substances. There is just one flow measuring range from 0,2 to 20 m/s. With a measuring  accuracy of the flow of 1,0 % F.S. and 1,5 % o.r. is the use of a vane anemometer most exact measurement method. With an accuracy of +/-0,5°C is this probe able to measure temperatures from -20 to +140°C and you can use it in temperatures from -30 to +100°C.The cable is 2 m long  and can be exposed to temperatures of 80 to 85°C.With the following measurements the macro is our biggest snap head:head diameter 85 x 80 mm; probe length 235 mmThe probe should be stored in temperatures from -65 to +150°C.By the snap head principle the probe is useable for a non stop operation and you can easily change the head.MiniAir macro ATEX alu/brassClassification II 2G EEx ia IIC T6 / I M2 EEX ia IThe MiniAir macro probe made of aluminium and brass is suitable to use it in the environment of explosive/inflammatory substances. There is just one flow measuring range from 0,2 to 20 m/s. With a measuring  accuracy of the flow of 0,5 % F.S. and 1,5 % o.r. is the use of a vane anemometer most exact measurement method. With an accuracy of +/-0,5°C is this probe able to measure temperatures from -20 to +140°C and you can use it in temperatures from -30 to +100°C.The cable is 2 m long  and can be exposed to temperatures of 80 to 85°C.With the following measurements the macro is our biggest snap head:head diameter 80 x 70 mm; probe length 235 mmThe probe should be stored in temperatures from -65 to +150°C.By the snap head principle the probe is useable for a non stop operation and you can easily change the head.

Extension rod Ø 15 x 300 mm

Extension cable 5 m

Extension cable 2 m

Extension rod Ø 15 x 180 mm